ttention to the power cord and monitor cable connections, you can troubleshoot any issues preventing your Peloton screen from turning on. peloton won't turn on Checking For Faulty Wires: If you have been experiencing issues with your Peloton screen not turning on or sometimes Peloton screen not showing metrics, it could be a sign of a faulty wire despite trying the previous troubleshooting tips that have worked in the past. Before jumping to conclusions, ensure your screen is turned on by following the previous tips again. Once confirmed, proceed to shake and play with the cables to see if the screen turns off at any point. Testing the monitor and power cord cables during this process is essential. If you notice that the screen turns off when manipulating these cables, you are likely dealing with a faulty cable that needs replacement. Faulty wires can disrupt the power supply and prevent your Peloton screen from turning on as intended. In such cases, it is crucial to address this issue promptly to ensure uninterrupted use of your Peloton. Check You Are Turning The Screen On Correctly: Ensure you are familiar with activating the Peloton screen, as it requires a specific procedure. It is common for individuals to overlook this crucial step. Are you having trouble with your Peloton screen? Please fix it by holding the power button to turn it on for two seconds. If the Peloton screen does not turn on, the bike has entered sleep mode due to 20 minutes of inactivity. To reactivate it, press the power button once more. Check The Resistance Knob: Having the resistance knob interfere with the monitor cable is rare but has been known to happen. It can be frustrating when you have followed all the troubleshooting steps and your Peloton screen still won’t turn on. In such cases, it is essential to check the resistance knob as it could be causing interference with the monitor cable. Turn the resistance knob to the left to reduce any magnetic resistance or pressure affecting the monitor cable to resolve this issue. If this adjustment allows you to turn on your screen successfully, likely, there was, indeed, interference from the resistance knob. Peloton Won't Turn On | Easy Fix for Bike & Bike+ If you find that adjusting the knob doesn’t solve the problem, it may be time to seek assistance from a trained technician who can further diagnose and address this issue. Perform A Factory Reset: Suppose you find yourself in a situation where nothing seems to be working, and all other troubleshooting methods have failed. In that case, your last option is to perform a factory reset. This can be a potential solution, but it comes with some requirements. Hold in the volume up button and power button simultaneously: You might be surprised to learn that this simple combination can turn your screen on and put it into factory setup mode. It’s a quick and easy way to access important settings and perform necessary actions on your device. Use volume buttons for navigation: Once you’ve successfully entered factory setup mode, you’ll need to navigate through the options using the volume buttons. These buttons act as your directional keys, allowing you to scroll through various menus until you find what you want. Select the recovery option: Among the different options available, make sure to choose “recovery.” This will allow you to recover or restore your device’s settings to their original state, which can be useful if you’re experiencing any issues or glitches with your device. Conclusion: If your Peloton screen doesn’t turn on, you can try several quick fixes before contacting customer support. Start by checking the power source and ensuring all cables are securely connected. If that doesn’t work, try a hard reset by holding the power button for 10 seconds. Keeping your software updated and performing regular maintenance can prevent future issues. Remember, troubleshooting common problems with your Peloton screen is often simple and can save you time and frustration.